WRINKLING OF THE FILM
In some applications, problems may arise resulting in wrinkling
of the coating that was previously applied to the floor.
|
| PROBLEM |
SOLUTION TO PROBLEM |
AVOIDING PROBLEM |
| TOO HEAVY AN APPLICATION - Some coatings when applied too thick will wrinkle after drying. |
Either sand smooth and recoat or remove and re-apply the coating. |
Follow the manufacturers recommendations as they pertain to the coverage rate. |
| SOLVENT ATTACK - Some coatings are too active chemically to topcoat over the coating that presently exists on the floor. |
Mechanically or chemically remove the present coating and redo the floor. |
Check the compatibility of the coating with the surface film prior to application; if necessary, use a less aggressive coating product. |
